what are the price ranges on a jaw crusher? Anyone who has ever bought one of these machines knows, Metso, Nordberg, Symons, JXSC, Sandvik, Zenith, Terex all the brand’s crusher machine is different. Even though, the price of the same brand of crusher is not the same. Because the crusher’s materials and design are different, its capacity is different. Therefore, when you compare with the crusher price, you must know the materials and capacity. That’s where the comparison.

Our company has encountered such a case, we give a customer needs the 50-100tph capacity of the crusher quote. Feedback to us is too expensive, others quote much cheaper than ours. Contrast crusher, we found that the other crusher manufacturer’s price is 50tph capacity, but our quote is 100tph. The jaw crusher price will be much more expensive.

There is a movable jaw lever on the back of the jaw crusher, which connects the movable jaw and the spring. The gap between the movable jaw and the fixed jaw can be adjusted by adjusting the spring. Then the size of the outlet can be adjusted.

Jaw liners are normally Mn-steel liners with 12-14 % Mn to withstand impact and abrasion resistance. With proper selection and design of the system, the life of jaw plates may be enhanced. Preferably discharge height should be optimum and jaw lines should be such that it can be repositioned so that the wearing of jaw plate s more uniform before discarding.

According to the jaw crusher accessories material selection, structural design, and other comprehensive consideration. So if you want to calculate the breaking capacity, you need to know the details of the material, the structure design, etc.

There are three main functions of the elbow plate of the jaw crusher: transmission of power, safety, and adjusting the size of the discharge inlet. When the elbow plate wear or broken, it should be replaced immediately. How to correctly disassemble and install a toggle plate?

1. Disassembly: The first screw out the baffle bolts, cut off the dry oil lubricating oil pipe, and the thrust plate hanging in the crane hook or other lifting equipment. Then release the spring at one end of the lever, pull the movable jaw to the fixed jaw, and remove the thrust plate.
2. Installation: After the elbow plate is removed, pull the new elbow plate into the bracket seat with a steel wire rope and loosen the hand hoist to make the elbow plate and the bracket seat in close contact. Then a pull rod and spring are installed, at this point, the elbow plate is supported in the bracket.

There are three aspects we need to consider when selecting a jaw crusher for a crushing plant or mining plant.

1. Demand. Based on the hardness of the ore to be broken. If the ore processing plant for hard or medium-hard ore rough crushing can choose a jaw crusher. In some non-metallic ore or cement industries, crushing medium-hard or soft ore can also use the impact crusher.
2. Service. Mainly includes two aspects, one is the pre-sale follow-up service. On the other hand, it is the after-sales service. A good manufacturer of after-sales service is very important, which is an important part of building a brand image. If after-sales service can not keep up, it may affect the progress resulting in incalculable losses.
3. Choice equipment type. The choice of model is decided by the size of crushing granularity. From a certain point of view, the choice of the model relates to the operation of the whole crushing production line. So the customer in the choice of crushing equipment, first clear crushing way, more granular material properties, particle size and crushing product requirements, the use of the corresponding force, and then choose crusher.

When you buy a jaw crusher, you need to know your budget. Under the same specification, compare the different brands, technologies, designs, performance, materials used for each component, after-sales service, price, etc. under the same specification. Then choose cost-effective equipment.